I'm upgrading kegs. I bought stainless connects and pressure relief valve.
Question is, where is best place...or cheapest place to get silicon seal kits for cornelius ball lock kegs ?
Cheers
Keg seals
by beer buddah » Mon Feb 27, 2017 08:49
Hi guys,
I'm upgrading kegs. I bought stainless connects and pressure relief valve.
Question is, where is best place...or cheapest place to get silicon seal kits for cornelius ball lock kegs ?
Cheers
I'm upgrading kegs. I bought stainless connects and pressure relief valve.
Question is, where is best place...or cheapest place to get silicon seal kits for cornelius ball lock kegs ?
Cheers
-
- beer buddah
- Brewer
- Posts: 193
- Joined: Wed Jun 04, 2014 21:37
Re: Keg seals
by Saccharomyces » Mon Feb 27, 2017 10:12
You are better buying them in bulk as individual rings of each type (post/diptube/lid). You can keep or sell any spares.
Got some slicone post and diptube rings from Altecweb.com last time:
Dip tube: BS-109: ORS-BS109 - x25: £6.25
Post o-ring: BS-111: ORS-BS111 - x50: £12.50
Don't know about lid o-rings, I am sure they do them but didn't need any.
Got some slicone post and diptube rings from Altecweb.com last time:
Dip tube: BS-109: ORS-BS109 - x25: £6.25
Post o-ring: BS-111: ORS-BS111 - x50: £12.50
Don't know about lid o-rings, I am sure they do them but didn't need any.
-
- Saccharomyces
- Brewer
- Posts: 85
- Joined: Fri Jun 19, 2015 15:08
Re: Keg seals
by pittsy » Mon Feb 27, 2017 16:36
Ebay is where I've gotten some before , such as http://www.ebay.co.uk/itm/3-x-Thick-Rep ... SwDNdV2LFd
-
- pittsy
- Brewer
- Posts: 1398
- Joined: Fri Apr 04, 2014 22:43
-
- beer buddah
- Brewer
- Posts: 193
- Joined: Wed Jun 04, 2014 21:37
Re: Keg seals
by PhatFil » Tue Feb 28, 2017 18:06
its an old link but full of good info..
http://www.aussiehomebrewer.com/forum/i ... opic=67746
http://www.aussiehomebrewer.com/forum/i ... opic=67746
-
- PhatFil
- Brewer
- Posts: 1045
- Joined: Thu Apr 03, 2014 10:52
Who is online
Users browsing this forum: No registered users and 3 guests