Discounted S/S camlock couplings

[Calvin]

Hi all,

.

As part of this exercise, we have managed to negotiate new prices with some of our suppliers. Included in these products are 1/2" and 3/4" S/S camlock fittings.
This is partly due to orders from members of this forum. We thought it only right to pass these savings on!

Email or call, mention this website and these will be the prices paid -

1/2" Part A - £1.62 each net
1/2" Part B - £4.34 each net
1/2" Part C - £3.10 each net
1/2" Part D - £3.92 each net
1/2" Part E - £2.64 each net
1/2" Part F - £1.80 each net
1/2" Part DC - £2.86 each net
1/2" Part DP - £1.35 each net

3/4" Part A - £2.17 each net
3/4" Part B - £4.52 each net
3/4" Part C - £4.41 each net
3/4" Part D - £4.15 each net
3/4" Part E - £2.64 each net
3/4" Part F - £2.64 each net
3/4" Part DC - £3.99 each net
3/4" Part DP - £1.91 each net

Carriage is extra and will depend on weight but orders up to 5 Kgs will be £10.00
VAT is extra.

Go directly to the camlock page by

I hope that these prices are of interest. I will try to keep them fixed for at least a couple of months.

I look forward to hearing from you.

Calvin

Good prices.

[Jeltz]

I have set you up as Vendor

Welcome to the forum

This thread had been locked for some strange reason, but open again now. Forum gremlins munching in the background. I must get some of your camlocks ordered, as I will have need of a few more fairly soon.

Perhaps this is a Daft Question, But would a 1/2" Stainless steel camlock male/female from this source mate correctly with a stainless steel camlock fitting sourced elsewhere, I ask as i took a punt on some 1/2" PP camlocks for a test and they are no where near compatible with 1/2" SS ones i use already use.

i took a punt on the PP camlocks with an 80C temp limit for the hlt/tun into the kettle liquor transport, hoping i could save ££s on h/w reserving the SS jobs for the boil and cold side where hi temps and hi sanitation is needed. ho hum...

I have had miss match problem with cam locks, gone back to hose and clips, but will be moving towards the poor mans option, with olives.
Perhaps Calvin could let us know which standard / specification these are manufactured to.
S

I've not encountered a mis match and I've had two lots from intrico and my last lot from HBB were wide bore C type along with some B's Es and dust plugs/caps. All fit together and play nicely

aye Cheers Aleman, as i got my original SS c/locks from hbb too, this is something to look at, just the reassurance i needed..

[Calvin]

Yes thanks for that Calvin.
S

Just received a job lot of camlocks, stainless 90's and a valve.
All top quality and a great price and better than those I got from a US based HB shop.

Anyone know if the discounts are still available for the stainless steel couplings

[graysalchemy]

Click on the link and check the prices.

1/2" stainless part A -£4 odds. Looks like the deals over:)