So I just need some gas taps and flow reducers (don't have temp control so can't have fixed length beer lines) and I can build my servery!
Just thought I'd start the forum with good news!
More kit arrived!
by calumscott » Sat Apr 05, 2014 17:17
Thanks to "Cpt.Frederickson" back on THBF (has he crossed the rubicon yet?) I now have a shiny new ODL triple CO2 reg!
So I just need some gas taps and flow reducers (don't have temp control so can't have fixed length beer lines) and I can build my servery!
Just thought I'd start the forum with good news!
So I just need some gas taps and flow reducers (don't have temp control so can't have fixed length beer lines) and I can build my servery!
Just thought I'd start the forum with good news!
-
- calumscott
- Admin
- Posts: 5147
- Joined: Sat Apr 05, 2014 00:25
- Location: Downton Village
Re: More kit arrived!
by Joe1002 » Sat Apr 05, 2014 17:24
Bet it won't be long before you get a fridge 
A fine beer may be judged with only one sip, but it's better to be thoroughly sure.
-
- Joe1002
- Moderator
- Posts: 2767
- Joined: Sat Apr 05, 2014 10:01
- Location: Essex
Re: More kit arrived!
by bobsbeer » Sat Apr 05, 2014 18:00
Sounds like my setup at the moment. But with the new build a kegerator is beckoning. At the moment I have 4ft of 3/16 tube which has enough resistance to stop foaming. But when the weather was cold it was too much.
-
- bobsbeer
- Brewer
- Posts: 4873
- Joined: Thu Apr 03, 2014 10:37
- Location: Milnthorpe, Cumbria
Re: More kit arrived!
by calumscott » Sat Apr 05, 2014 18:07
I just don't have room for a fridge where the bar is going sadly, I'm at the mercy of the ambience...
-
- calumscott
- Admin
- Posts: 5147
- Joined: Sat Apr 05, 2014 00:25
- Location: Downton Village
Who is online
Users browsing this forum: No registered users and 1 guest