Re: Forum 1/2" Q Max Cutter

Postby cononthebarber » Fri Mar 06, 2015 22:59

Can I have it please? PM will follow :thumb:

Getting ready for The Homebrew Festval 2017 - Click HERE for more info :thumb:
User avatar
cononthebarber
Brewer
 
Posts: 374
Joined: Sun Apr 06, 2014 15:06
Location: Shrewsbury, West Midlands

Re: Forum 1/2" Q Max Cutter

Postby ArmChair » Sat Mar 07, 2015 10:11

Yeah sure,

Will post out Monday
User avatar
ArmChair
Brewer
 
Posts: 276
Joined: Wed Jun 18, 2014 21:27

Re: Forum 1/2" Q Max Cutter

Postby cononthebarber » Sun Mar 29, 2015 15:52

Finished with this now, let me know if you want it next :thumb:

Getting ready for The Homebrew Festval 2017 - Click HERE for more info :thumb:
User avatar
cononthebarber
Brewer
 
Posts: 374
Joined: Sun Apr 06, 2014 15:06
Location: Shrewsbury, West Midlands

Re: Forum 1/2" Q Max Cutter

Postby cononthebarber » Mon Mar 30, 2015 09:23

Also so that I remember where I've put this...its in the right hand compartment in the top tray of my toolbox...:)

Getting ready for The Homebrew Festval 2017 - Click HERE for more info :thumb:
User avatar
cononthebarber
Brewer
 
Posts: 374
Joined: Sun Apr 06, 2014 15:06
Location: Shrewsbury, West Midlands

Re: Forum 1/2" Q Max Cutter

Postby whiter shade of ale » Sun Jan 03, 2016 16:57

Do you still have it conan? If so could I have it next? Let me know if you've still got it and I'll pm you my address
User avatar
whiter shade of ale
Brewer
 
Posts: 92
Joined: Wed Jun 04, 2014 17:59

Re: Forum 1/2" Q Max Cutter

Postby cononthebarber » Sun Jan 03, 2016 22:31

Hi yes I still have it, pm me your address and I'll pop it in the post :thumb:

Getting ready for The Homebrew Festval 2017 - Click HERE for more info :thumb:
User avatar
cononthebarber
Brewer
 
Posts: 374
Joined: Sun Apr 06, 2014 15:06
Location: Shrewsbury, West Midlands

Re: Forum 1/2" Q Max Cutter

Postby whiter shade of ale » Sun Jan 03, 2016 23:06

Pm'd. Cheers!
User avatar
whiter shade of ale
Brewer
 
Posts: 92
Joined: Wed Jun 04, 2014 17:59

Re: Forum 1/2" Q Max Cutter

Postby whiter shade of ale » Fri Jan 15, 2016 10:26

I've now received this from conon and shall be using it shortly. Whoever would like it next please drop me a pm
User avatar
whiter shade of ale
Brewer
 
Posts: 92
Joined: Wed Jun 04, 2014 17:59

Re: Forum 1/2" Q Max Cutter

Postby SteakAndAle » Tue Apr 19, 2016 19:52

Looks like I'll need it if it's going spare; have PM'd Whiter Shade
User avatar
SteakAndAle
Brewer
 
Posts: 9
Joined: Sat Feb 27, 2016 12:13
Location: London

Re: Forum 1/2" Q Max Cutter

Postby whiter shade of ale » Sat May 14, 2016 00:49

Sorry for the delay. I've tried to respond to your pm several times, but I'm not sure if it's working. Seems to be stuck in my outbox for some reason. If you still need it pm me again with your address and I'll pop it in the post. :thumb:
User avatar
whiter shade of ale
Brewer
 
Posts: 92
Joined: Wed Jun 04, 2014 17:59

Re: Forum 1/2" Q Max Cutter

Postby SteakAndAle » Sun May 15, 2016 10:08

No worries at all, as per my reply it turned out to be surplus to requirements :thumb:
User avatar
SteakAndAle
Brewer
 
Posts: 9
Joined: Sat Feb 27, 2016 12:13
Location: London

Re: Forum 1/2" Q Max Cutter

Postby Joeka101 » Tue Oct 11, 2016 22:07

I was just about to post asking advice in hole cutting and found this thread! Any chance I could borrow next chaps? Not sure which of you actually has the cutter now - PM'd both.

Definately big enough to cut for 1/2" bsp nipple? Just because Angel Home Brew suggests 21mm (though I cant imagine it makes much difference).

Joe
User avatar
Joeka101
Brewer
 
Posts: 6
Joined: Tue Oct 11, 2016 21:20

Re: Forum 1/2" Q Max Cutter

Postby naturals » Sun Nov 06, 2016 22:06

Is the cutter available at the minute? Looking to borrow it in a couple of weeks if available!
User avatar
naturals
Brewer
 
Posts: 35
Joined: Tue Jan 20, 2015 23:53

Re: Forum 1/2" Q Max Cutter

Postby bastardbrain » Sat Jan 28, 2017 16:48

Is the cutter still floating aroung guys?
Anyone near Wigan got the tools and know how to do the Thermopot converion?
User avatar
bastardbrain
Brewer
 
Posts: 5
Joined: Sun May 22, 2016 15:21

Re: Forum 1/2" Q Max Cutter

Postby naturals » Wed Oct 04, 2017 18:39

I have a cutter - more than happy to loan it out if people are willing to cover postage and a small deposit refundable on its return.

I know it's a long time since you posted asking but if you haven't built your mash tun yet I made a video of my build.

User avatar
naturals
Brewer
 
Posts: 35
Joined: Tue Jan 20, 2015 23:53

Previous

Who is online

Users browsing this forum: No registered users and 3 guests