HOW TO VIDEOS: Thermopot Mash Tun Conversion

Hi All,
I finally got around to building my thermopot mash tun and made a little video of the process (also, first time on the forum in at last six months or so due to the dodgy malware alerts - happy to see it now all seems to be working!).

I'd be really grateful for any likes, subscribes and comments you'd be kind enough to leave - trying to get a few bits up on YT over the coming weeks.

nice video

Crackin Video... well produced.

Yes well done, clear instuctions on how to do the job. Thing I don't get is that 93 viewed the vidio and only 3 bothed to say anything. Did the other 90 not like it, doubt it and from the title they knew what they would be getting.
It is a forum here not a reading room, was the way I understand it .
S
p.s. I was one of the 90 looks like I have woke up grumpy again.

I did a bottom draining mash Tun like this last year using pretty much the same equipment and tools. What I found difficult was getting a good seal at the drain and the base of the tun. I don't seem to have any tool that could fit into the drain to give it an extra turn. Any suggestions?

The drain I bought had two little lugs inside the bore. A large screwdriver is enough to get a good grip on the tun side, holding the elbow on the other side got me a leak free join. Tested it with about 30L of water for a week and no leaks at all.

Edited to add - if you skip to here you can see these in the video.

Thing I don't get is that 93 viewed the vidio and only 3 bothed to say anything. Did the other 90 not like it, doubt it and from the title they knew what they would be getting.

It's up to over 400 views now and still only three comments. I guess if people disliked it they'd hit the dislike button. Thankfully 100% thumbs up so far.

If anyone hasn't seen the video yet, I'm always grateful for a comment on YT, thumbs up, subscribe, whatever you fancy!

I liked and subbed a while ago. Sorry I forgot to come back here and comment. Great video, but I'd appreciate a little narration for extra detail. It's certainly got me thinking about a similar build.

Cracking video, i might give this a try

Sent from my SM-T585 using Tapatalk

[Joe1002]

Great video

I'm toying with doing another thermopot build, you did yours slightly differently to the way I did first time round as I went for a completely flush bottom (on the inside). It was a PITA to do and probably not completely necessary. Do you have a link for the deck fitting?

Great video pal..............