grainfather and beersmith

Postby john luc » Fri Dec 02, 2016 01:45

Anyone that has a grainfather and uses beersmith,here is an equipment profile set up,
1480419931089112195914.jpg
1480419931089112195914.jpg (28.22 KiB) Viewed 459 times
, next you also need to do this,
"Grainfather Profile for BeerSmith V2.3
Water to Grain ratio should be set at 2.7L/kg when selecting a mash profile
Default grain absorption should be changed in the Beersmith Advanced settings (tools->options->advanced). The default setting is 0.96 fl oz/oz. This will need to be changed to 0.7669 fl oz/oz (0.8 L/kg) to line up exactly with the Grainfather official calulations"
User avatar
john luc
Brewer
 
Posts: 140
Joined: Sat Dec 20, 2014 15:33

Re: grainfather and beersmith

Postby john luc » Fri Dec 02, 2016 01:51

You can also set up a second equipment profile that I call "grainfather corney". This one means that when you brew with this setup you will finish with a full corney and no waste. Set up the same with 2 adjustments, adjust boil volume from 28 to 26 and adjust batch volume from 23 to 21
User avatar
john luc
Brewer
 
Posts: 140
Joined: Sat Dec 20, 2014 15:33


Who is online

Users browsing this forum: Bing [Bot] and 3 guests